Space Heaters tend to blow a fuse. To prevent this, you can keep it tidy on a regular basis, use it where humidity is low, and ensure no flammable object near it.

Ways to Prevent a Space Heater from Blowing a Fuse

1. Scrub It Regularly

If you want to tidy up a space heater, you need to keep dust away from it. Use a damp cloth to scrub it. If you are using it for the first time, you can use plastic wrap to cover it. Do not use water because it may cause it to rust faster.

2. Use It where Humidity is Low

If you use a space heater in an area that gets plenty of humidity, such as near a water source or any place with high humidity, it will be prone to blow a fuse. Place it away from these areas and ensure that the humidity is low.

3. Ensure There is no Flammable Object Near It

As space heaters produce a lot of heat, you would want to avoid something that will catch fire easily. When using a space heater, ensure that there is no flammable object near it. This way, you can prevent it from blowing a fuse and causing a fire when the heat reaches it.

4. Use Space Heaters with Thermostat Control

You can prevent your space heater from blowing a fuse if you choose one that has the thermostat control feature. This feature will allow you to be able to set the temperature that is right for your home. This way, you can control the amount of power that is required for it to run effectively. It can also save you money if it draws less power than other space heaters do.

5. Use a Low-Voltage Fuse

If the fuse keeps on blowing, then you should consider changing it with a low-voltage fuse. There are fuses made especially for these types of space heating systems. If you have an old fuse, try changing it to a new one.

6. Use a Socket that is Suitable for the Space Heater

When buying a space heater, there are different sockets available. Select one that is suitable for your home so that it can fit well in the socket. If it doesn’t fit well, then you should consider buying another socket.

What type of fuse does a space heater use?

Space heaters use a variety of fuses. Both the plug and bulb fuses are used in the majority of space heaters. A plug fuse sits inside and is connected to a glazed ceramic element at one end and the live wire at the other. This glazed ceramic element is wrapped around with a wire-like metal. 

The bulb fuse is located in a porcelain socket that screws into the same hole as the light bulb. This means that if the bulb blows, the fuse will blow as well. It has a porcelain socket and a screw-in metal terminal.

How to Clean a Space Heater?

Keeping the space heater tidy is very important. Over time, particulates and grime accumulate over the heater’s exterior. Not only does it look rather unattractive, but it can also affect its performance. 

However, cleaning a space heater is not difficult. Here is a step-by-step guide on how to do it.

The first thing you need to do is to unplug the heater and switch off the gas supply. Then, let it cool down completely. Remove any dirt from the bottom of the heater. This can be done with a vacuum machine or by wiping it gently with a damp sponge.

After that, you want to start scrubbing the outer part of the heater. This can be done using a damp fabric or sponge dipped in warm water and detergent. Wash away any dirt and wipe it down with a dry sponge. afterward.

If the heater has an additional grill at the top, then you would want to tidy it up as well. You can use water and detergent for this part. Once that is done, rub it with a fabric piece until it is completely spotless.

Top Brands for Space Heaters

Some of the top brands for space heaters are:

1. Vornado VH200 Space Heater

2. Dr. Infrared Portable Space Heater

3. Lasko Ceramic Portable Space Heater

4. Lifesmart 6 Element Heater

5. Andily Electric Space Heater

6. Duraflame Space Heater

Hey! Do You Wanna Buy Best Space Heater For Large Room Then Click Me.

Conclusion

Space heaters are an efficient way of heating your home without causing too much stress on your system. This is because they use less power when compared to other ways of heating.
If you want to save electricity and money, then a thermostat-controlled space heater is for you. If you have to use one in an area with plenty of humidity, you should consider buying a dry heater. Finally, to prevent it from rusting quickly, choose one that has a low voltage fuse installed.

Frequently Asked Questions

Q. How many amps does a space heater use?
A. Space heaters generally use between 1 and 3 amps. However, this will vary depending on the heater’s power and the rate it draws power. 

Q. What kind of fuse do I need for a space heater? 
A. Normally, you will need an ATC (automatic thermal cutout) fuse for your space heater. However, there are fuses with a thermostat that will allow you to set the temperature that it runs at. You may choose between a plug or a bulb fuse.

Q. What is a space heater’s rating?
A. The rating of a space heater tells you how much heat it can produce. This also determines how long it will take the heater to cool the room down after being switched off. The more powerful the heater, the higher its rating will be. 

Q. What size of space heater does my home need?
A. It is always best to check with your local building regulations department to know the size of the space you are warming before buying a space heater. If you are unsure what size to buy, then it would be best to buy one with a higher rating than your room’s temperature. This way, it will heat everything in the room evenly.